Pride Abrasives 1000 grit Waterstone
Pride Abrasives 1000 grit Waterstone (cream) 14 microns. Pride stones use a unique vitrification process on the Aluminum Oxide, ensuring these stones form a burr quicker and stay flatter longer. Use this 1000 grit stone for general knife maintenance and to bring the edges together to form a burr.
Made in USA.
Dimensions: 8"x3"x1"
WW1000
Pride Abrasive 1000/3000 Grit Waterstone
The Pride Abrasive combination waterstone features a 1000 grit and a 3000 grit which are bonded together to give to buyer the most important two stones in one purchase. The 1000 Grit stone is used on dull knives to put a new edge (bevel) on the knife this grit will leave a toothy, or jagged, edge that needs to be smoothed a refined with the 3000 Stone. These two stones can effectively sharpen a knife but if you are going to cut protein a higher grit may be desired. Comes in a wooden presentation box.
Made in USA.
Dimensions: 8"x3"x1"
WW1000/3000
Pride Abrasive Water Stone Set
Pride Abrasives Water Stone Set comes with three grit varieties.
The 1,000 grit cuts fast and should be used on dull knifes to establish an edge (form a burr).
The 3,000 Grit is ideal for edge maintenance, the edge will be refined and suited for vegetables coming off of this grit but not polished, (for meat and fish).
The 6,000 grit water stone can be used to further refine and maintain already sharp knives, it can be used to smooth/ remove the wired edge and it will polish your knives for a longer lasting edge.
Water Stones need water and slurry to work properly. Ensure that your stone is fully soaked through before use. Immerse in water, wait for bubbles to stop, low grit stones need more water.
Made in USA.
WW136 
