Naniwa Regular 220 Flattening Stone

---

Promotes maximum cutting for all grit sizes of whetstones.
- Dimensions: 17.5 cm x 5.5 cm x 3 cm
- Coarse grit carbide stone
- Usable for grit size: 1000-5000
- Produces extremely flat results on all water stones, ceramic or traditional. Dip it in water before use.

---

A-102

Naniwa Large 24 Grit Flattening Stone

---

- Dimensions: 11.8 in x 5.9 in x 0.8 in
- 24 grit Coarse carbide stone
- Promotes maximum cutting for all grit sizes of whetstones.
- Produces extremely flat results on all water stones, ceramic or traditional. Flattener and stone should be wet before use. This large flattening stone comes with rubber feet and is designed to be laid flat in a sink bottom while you hold the stone and run it across the flattener. Extra coarse for fast cutting. We use these because of the high volume of hand sharpening. This cuts quickly, but can leave fine grooves in the higher grit stones, which should be smoothed with your dressing stone. For persons doing a more normal volume of sharpening, the large 220 grit provides the benefit of truer flat without the grooving, it just takes longer. (Most flattening stones are around 220 grit)

---

A-110

Naniwa Large 220 Grit Flattening Stone

---

Sharpening stones must be kept flat for peak performance, particularly when sharpening traditional Japanese knives. This is a very large flattening stone with rubber feet to provide firm traction on the bottom of your sink or slop trough. Press the stone onto the flattener and use a figure eight motion. You can get a truer surface than with a small flattening stone.
- Dimensions: 11.8 in x 5.9 in x 0.8 in
- 220 grit Coarse carbide stone
- Promotes maximum cutting for all grit sizes of whetstones.
- Produces extremely flat results on all water stones, ceramic or traditional. Flattener and stone should be wet before use.

---

A-120

Naniwa Cleaning/Dressing Stone

---

This small hand-held stone is used for cleaning metal fragments, creating slurry and flattening small flaws. The higher grit stones (5000 and above) really benefit from a cleaning stone. Higher grit stones have a harder bonding agent which causes the abrasives to release more slowly and to be more prone to "loading up" or collecting metal particulate. We recommended that you use a cleaning stone for these high grits. Splash and go, no soaking needed.

Dimensions: Height: 3.2 cm, Length:6.5 cm, Width: 4.7 cm

---

A-206

Naniwa Stone Holder (Toishi Dai)

---

The Naniwa Stone Holder secures your stone while sharpening or flattening. It has good traction with the rubber mounts and sufficient weight to keep from moving around. Holds stones from 5.5 to 9 inches in length.
This is good quality stainless steel that won't rust out on you. We tested one leaving it in the water overnight and pulling it out in the daytime as we used it. Other models rusted on us within days. The Naniwa never rusted after two months, and the screw downs still move smoothly. Now, these shouldn't be left in the water and we're not suggesting that. But if it gets accidentally left in the soak tank, it's not going to be a problem. Weight: 627 gram Length: 29 cm Material: rubber and stainless steel

---

A-902

Naniwa Fine Rust Eraser (Sabitoru)

---

Designed to remove red rust from carbon knives and restore their shine. You'll get a higher polish by wetting the knife first and even more polish by using a drop of oil on the blade. This is a very high quality fine eraser.

---

A-903

Naniwa 600 Grit Diamond Sharpening Stone

---

Naniwa Diamond Sharpening Stones are uniquely made by taking the diamond aggregate and mixing with a 1mm thick bonding layer on a sturdy metal base. This ensures even distribution and constant cutting surface, every time, throughout the life of the stone. Used for very hard steel blades and ceramic blades.

600 Grit

Splash and Go

Comes with Nagura stone for slurry

Dimensions: 8 1/4 x 2 7/8 x 5/8 in.

---

DR-7506

Naniwa 1000 Grit Diamond Sharpening Stone

---

Naniwa Diamond Sharpening Stones are uniquely made by taking the diamond aggregate and mixing with a 1mm thick bonding layer on a sturdy metal base. This ensures even distribution and constant cutting surface, every time, throughout the life of the stone. Used for very hard steel blades and ceramic blades.

1000 Grit

Splash and Go

Comes with Nagura stone for slurry

Dimensions: 8 1/4 x 2 7/8 x 5/8 in.

---

DR-7510

Naniwa 3000 Grit Diamond Sharpening Stone

---

Naniwa Diamond Sharpening Stones are uniquely made by taking the diamond aggregate and mixing with a 1mm thick bonding layer on a sturdy metal base. This ensures even distribution and constant cutting surface, every time, throughout the life of the stone. Used for very hard steel blades and ceramic blades.

3000 Grit

Splash and Go

Comes with Nagura stone for slurry

Dimensions: 8 1/4 x 2 7/8 x 5/8 in.

---

DR-7530

Naniwa 6000 Grit Diamond Sharpening Stone

---

Naniwa Diamond Sharpening Stones are uniquely made by taking the diamond aggregate and mixing with a 1mm thick bonding layer on a sturdy metal base. This ensures even distribution and constant cutting surface, every time, throughout the life of the stone. Used for very hard steel blades and ceramic blades.

6000 Grit

Splash and Go

Comes with Nagura stone for slurry

Dimensions: 8 1/4 x 2 7/8 x 5/8 in.

---

DR-7560

Naniwa Leather Stropping Block

---

The Naniwa Natural Leather Strop is a great addition to any kitchen. This strop features a smooth natural leather surface on top and rubber foam non-stick bottom.
- Dimensions: 8.25 in x 2.75 in. (210mm x 70mm). Made in Japan.

---

IU-1100

Naniwa Sink Bridge

---

The Naniwa sink bridge is great for creating a stress-free environment when sharpening your knives and flattening your stones. Constructed of sturdy, high-grade stainless steel that won't rust under constant exposure to water. Adjustable to fit sinks from 15-3/4" to 22" wide and holds stones from 8 to 9-7/8 inches long, in terms of the rear stop. For our in-house sharpening, we just use a non-skid pad and forego the use of the rear stop. Ideally, you would set a stone holder right on top of the sink bridge.

---

IZ-1111

Naniwa Multi Stone (Waterstone) 1000/3000 Grit

---

Naniwa Multi Stone 1000/3000 Grit. This reliable Naniwa 1000/3000 is a great starter stone for someone with no stone collection at all. The 1,000 (Red) for setting an edge and creating a burr, and the 3,000 (Yellow) for smoothing and polishing the edge. The high amount of bonding agent used in this stone is typical of Japanese made waterstones, so they will last, however the price is much more digestible than comparable stones from Japan.

Made in Vietnam.

---

MV-510/530

Naniwa Lobster 220 Grit Waterstone

---

The Naniwa (Lobster Brand) 220 Grit waterstone is an aggressive stone with a fair amount of bite. This stone is best used on knives that are very dull, damaged or have issues like a missing tip. The course texture will allow the user to create a new bevel in their blade with ease. These are porous stones so be sure to let them soak up the water until the bubbles cease. Made in Vietnam.

Dimensions:

210mm X 65mm X 30mm

8.27" X 2.56" X 1.18"

---

NAJ-502

Naniwa Lobster 1000 Grit Waterstone

---

The Naniwa (Lobster Brand) 1000 grit waterstone is the most commonly used grit waterstone. This stone is intended for daily maintenance and establishing an edge on a dull knife. Needs to be soaked in water (usually until the bubbles stop) before use. Made in Vietnam.

Dimensions:

210mm X 65mm X 30mm

8.27" X 2.56" X 1.18"

---

NAJ-510

Naniwa Lobster 3000 Grit Waterstone

---

The Naniwa (Lobster Brand) 3000 Grit sharpening stone (210x65x20mm). At 20mm height this stone is slightly shorter than the other (Lobster 220 & 1000) naniwa waterstones. This 3000 Grit stone has a very smooth texture and is intended for polishing a knife for cutting proteins. This is a waterstone so it will need to soak for a minute or two before use. Made in Japan.

Dimensions:

210mm X 65mm X 20mm

8.27" X 2.56" X 0.79"

---

NAJ-530

Naniwa Lobster Sharpening Stone Set

---

This is the Naniwa 3 piece sharpening stone bundle. These are fantastic stones for any beginner due to the quality and cost effectiveness. This set covers all your grit bases while leaving room to add more.

Items Included:

220 Grit - Great for very dull or damaged knives. Use this stone to form a burr and set a bevel.

1000 Grit - Maintenance stone for touching up dull knives. Frequently used to refine or continuing to establish the bevel and form a burr.

3000 Grit - The finest grit stone in this set. Intended to polish the marks left from the previous stones so the knife's edge is as smooth as possible. Ideal for cutting fish and meat.

Made in: Taiwan

---

NAJ-SET

Naniwa 10,000 grit Nagura Stone

---

The Naniwa 10,000 Grit Nagura Stone. While it is called a stone it is not intended to be used on your knives, instead this product is used to maintain your stones. This is a 10,000 grit Nagura stone so use it to clean and prepare your 10,000 grit waterstone.

2-3/8" x 1-3/16" x 3/4" (60mm x 30mm x 20mm). Made in Japan.

---

NG-10000

Naniwa 3000 grit Nagura Stone

---

The Naniwa 3,000 Grit Nagura Stone. While it is called a stone it is not intended to be used on your knives, instead this product is used to maintain your stones. This is a 3,000 grit Nagura stone so use it to clean and prepare your 3,000 grit waterstone.

2-3/8" x 1-3/16" x 3/4" (60mm x 30mm x 20mm). Made in Japan.

---

NG-3000

Naniwa 5000 grit Nagura Stone

---

The Naniwa 5,000 Grit Nagura Stone. While it is called a stone it is not intended to be used on your knives, instead this product is used to maintain your stones. This is a 5,000 grit Nagura stone so use it to clean and prepare your 5,000 grit waterstone.

2-3/8" x 1-3/16" x 3/4" (60mm x 30mm x 20mm). Made in Japan.

---

NG-5000

Naniwa 400 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

400 Grit is great to use for fast basic sharpening and/or fixing small imperfections.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-304

Naniwa 600 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

600 Grit is great to use for fast basic sharpening and/or fixing small imperfections.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-306

Naniwa 800 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

800 Grit is great to use for basic sharpening.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-308

Naniwa 1000 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

1000 Grit is great to use for basic sharpening.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-310

Naniwa 3000 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

3000 Grit is great to use for finish sharpening.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-330

Naniwa 5000 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

5000 Grit is great to use for polishing after sharpening.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-350

Naniwa 10,000 Grit Professional (Chosera) Stone

---

Naniwa Professional Stones (formally known as Chosera) utilize Magnesia in their bonding agent; giving these stones a longer life and faster sharpening capabilities. These stones are ceramic and do not require soaking. Splash and go.

10,000 Grit is great to use for high polishing after sharpening for a razor edge.

Size: 8.25x2.75x0.8 in. (210x70x20mm)

---

P-390

Naniwa 220 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
This coarse stone is recommended for use in chip repair, flattening shinogi lines and things of this nature. As opposed to traditional waterstones in this grit range, this Naniwa 200 stays flat longer, and doesn't create excessive slurry. A favorite of mine for repair work.

---

S2-402

Naniwa 400 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
This coarse stone is recommended for use in chip repair, flattening shinogi lines and things of this nature. As opposed to traditional waterstones in this grit range, this Naniwa 400 stays flat longer, and doesn't create excessive slurry. A favorite of mine for repair work.

---

S2-404

Naniwa 800 grit Ceramic Super Stone

---

Size:(210x70x20 mm) (8.25x2.75x.80 in.)
Naniwa Super Stones require no soaking, just a splash and go.
Whereas the 1000 grit is normally considered the starter stone for an undamaged knife, if you're doing a lot of sharpening and want to save time, the 800 is faster. You can then skip the 1000 and move directly to a 3000 grit. No need to soak the stone, just splash and go.

---

S2-408

Naniwa 1000 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
Naniwa "Super Stones" require no soaking, just splash and go. The 1000 grit stone is used for establishing an edge on a dull knife. It will remove micro-pitting but any chips will require a more coarse stone. This is the average size used for sharpening a dull knife. For use on meats, you may want to continue sharpening with a higher grit but will work great on vegetables.

---

S2-410

Naniwa 3000 Grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
The Naniwa 3000 grit Ceramic Super Stone makes for a great final stone, a perfect step-up from the 1,000 grit stone. It is fine enough to be used prior to using a finer grit such as an 8,000 grit water stone.
The higher abrasive levels contribute to the ease of sharpening. No need to soak the stones in water, just give it a splash and go. Do not soak the stone.

---

S2-430

Naniwa 5000 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
The newly designed Naniwa Super Stones are a greatly improved. The material is made from a new resin bonding agent which allows for a higher concentration of abrasive particles. The higher abrasive levels enhance the tactile feel of the stone while improving the time of sharpening.

---

S2-450

Naniwa 8000 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
The higher grit allows this stone to be used for both sharpening and polishing. However, it shouldn't be used as just a polisher. Since the grain count is higher than 6000, this waterstone will finely tune the edge of your knife allowing it to be sharpened and polished. Do not soak, just a splash and go.

---

S2-480

Naniwa 10,000 grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
This grit size is meant to polish more than sharpen. The Naniwa 10,000 whetstone is perfect for using as a finishing stone after you sharpen with a lower grit to temper out the burr.

---

S2-490

Naniwa 12,000 Grit Ceramic Super Stone

---

Size: (210x70x20 mm) (8.25x2.75x.80 in.)
Naniwa "SuperStones" require no soaking, just splash and go.
The Naniwa 12,000 Grit Super Stone is used as the final stage of sharpening. Generally speaking, a stone with this high grit is used with Traditional Japanese knives for polishing the shinogi line and edge. Many chefs will also increase the angle a couple degrees to put a very fine micro-bevel with this stone. Naniwa dressing stone is recommended to create slurry and clean particles that embed in high grit stones.

---

S2-491