G-463 $13.95Product Temporarily Unavailable
| Global MinoSharp Sharpening Guides
Guide rails keep your knives sharp and in good condition by guiding your hands through your whetstone.
These guides are designed to clip to the back of the knives and demonstrate the proper angle for sharpening Japanese knives (17 degrees). A guide rail makes sure you are setting the right edge and gives you peace of mind when sharpening.
It's a quick and inexpensive way to insure that you are setting your edges correctly.
Instructions are included on the back.
G-463
901028 $7.95In Stock
| Jikko Coarse Rust Eraser (Sabitoru)
Coarse grit block for removing thick rust off of carbon steel knives.
901028
901011 $7.95In Stock
| Jikko Fine Rust Eraser (Sabitoru)
Fine grit block for removing rust off of carbon steel knives.
901011
901004 $7.95In Stock
| Jikko Medium Grit Rust Remover (Sabitoru)
Jikko's medium grit rust eraser removes rust from carbon knives to recreate a shiny finish. This eraser is robust enough to remove fairly thick rust without scratching the underlying steel.
901004
A-903 $7.95In Stock
| Naniwa Fine Rust Eraser (Sabitoru)
Designed to remove red rust from carbon knives and restore their shine. You'll get a higher polish by wetting the knife first and even more polish by using a drop of oil on the blade. This is a very high quality fine eraser.
A-903
12802 $6.95Product Temporarily Unavailable
| Norton Sharpening Guide
The Norton Sharpening Guide is a measurement tool for knife sharpening, to help the sharpener determine the correct angle for the knife being sharpened. This guide shows angles for both Japanese and German knives. Included with the knives is a packet on sharpening instructions written by Norton Abrasives.
12802
SIGSA2104R $8.95In Stock
| Robert Welch Replacement Sharpening Wheel
Replacement sharpening wheel made of high quality ceramic material. Used in most draw sharpeners the ceramic wheel can get worn over time with use, simply open covering remove old wheel and insert the new wheel to revitalize your draw sharpener. Can work with Robert Welch, MAC and Kyocera draw sharpener (SR-2, RSN-20-BK).
SIGSA2104R
IZ-1111 $79.95In Stock
| Naniwa Sink Bridge
The Naniwa sink bridge is great for creating a stress-free environment when sharpening your knives and flattening your stones. Constructed of sturdy, high-grade stainless steel that won't rust under constant exposure to water. Adjustable to fit sinks from 15-3/4" to 22" wide and holds stones from 8 to 9-7/8 inches long, in terms of the rear stop. For our in-house sharpening, we just use a non-skid pad and forego the use of the rear stop. Ideally, you would set a stone holder right on top of the sink bridge.
IZ-1111
