Dexter 2 3/4 in. New Haven Oyster Knife

---

The Dexter 2 3/4 in. New Haven Oyster Knife has a slight curve to the tip of the blade, to make opening oysters easy.

---

X10080

Dexter 2 3/4 in. New Haven Oyster Knife

---

The Dexter 2 3/4 in. New Haven Oyster Knife has a curved tip, making opening even the most difficult oysters easy.

---

X10473

Dexter 2 3/4 in. Providence Oyster Knife

---

The Dexter 2 3/4 in. Providence Oyster Knife is great for prying open Gulf oyster shells. Made of high carbon steel, with a Grip-Tex polypropylene handle.

---

X10483

Dexter 2 3/4 in. Providence Oyster Knife

---

The Dexter 2 3/4 in. Providence Oyster Knife is for those who prefer the warmth and feel of a real wood handle. Great for opening up Gulf oysters.

---

X10161

Dexter 3 3/4 in. Clam Knife

---

The Dexter 3 3/4 in. Clam Knife is a necessity when shucking clams. Using the Clam knife allows you to open the clam shell, without damaging the clam.

---

X10421

Dexter 3 in. Clam Knife

---

The Dexter 3 in. Clam Knife knife is a necessity when shucking clams. Using the Clam knife allows you to open the clam shell, without damaging the clam.

---

X10523

Dexter 3 in. Short Boston Oyster Knife

---

The Dexter 3 in. Short Boston Oyster Knife is designed with a large handle and short, thin blade, to open oysters like Kumamoto oysters.

---

X10493

Dexter 4 1/2 in. Scallop Knife

---

The Dexter 4 1/2 in. Scallop Knife is made of stain free, high carbon steel, with a slip resistant polypropylene handle.

---

X31370

Dexter 4 in. Galveston Oyster Knife

---

The Dexter 4 in. Galveston Oyster Knife has a wide, strong blade with a large handle, making opening Gulf Oysters easy.

---

X10503

Dexter 4 in. Long Boston Oyster Knife

---

The Dexter 4 in. Long Boston Oyster Knife is used on delicate shelled oysters grown in Japanese Lantern nets, like Kumamoto or Pacific/Kumamoto hybrids. The thin tip allows you to enter the oyster with a minimal amount of chipping and breakage.

---

X10151

Dexter Long Boston 4 in. Oyster Knife

---

The Dexter Long Boston 4 in. Oyster Knife is used on delicate shelled oysters grown in Japanese Lantern nets, like Kumamoto or Pacific/Kumamoto hybrids. The thin tip allows you to enter the oyster with a minimal amount of chipping and breakage.

---

X10463

F Dick 2 1/4 in. Stainless Steel Oyster Shucker

---

The F Dick 2 1/4 in. Stainless Steel Oyster Shucker is the only tool you'll ever need for shucking oysters and clams.

---

D9 1096 00

F. Dick 3 in. Oyster Knife

---

The F. Dick 3 in. Oyster Knife is the best oyster shucker for wavy edge, delicate oysters like kumamoto or Kumamoto hybrids. The tip is pointed and one side is sharpened, the sharpened edge works well for small clams, Olympia and Belon oysters. Fully forged and full tang.

---

D9 1094 00

LamsonSharp Walnut 3 in. Curved Shrimp Deveiner Closeout Sale

---

This unique rosewood handled too shell's and de-veins shrimp in one stroke. The 3 inch curved blade follows the contours of the shrimp, while the teeth on the bottom edge grab the vein. To use, simply push the blade through the shell, and pull up. Flip the blade over to butterfly shrimp.

---

L39468

R Murphy New Haven Stainless Steel Oyster Knife

---

The R Murphy New Haven Stainless Steel 2 5/8 in. Oyster Knife features a wooden handle. The tip is curved upward to catch the top shell of the oyster and leverage against the bottom for easy opening.
Cook's Illustrated Top Pick in which they write:

"well crafted, with a simple, comfortable wooden handle that never budged in our hands. It was able to slice oyster muscle without damaging the meat. One shucker noted that it seemed to disappear and become part of your hand."

---

NHOYS

R. Murphy 2 1/8 in. Duxbury Oyster Knife

---

The R. Murphy 2 1/8 in. Duxbury Oyster Knife is made with commercial grade (2.4 mm) pointed stainless steel blade with a green polypropylene handle. Made in the U.S.A.

---

DUOYSPHCG

R. Murphy 3 1/4 in. Large Clam Knife

---

The R. Murphy 3 1/4 in. Large Clam Knife is a stainless steel, commercial blade. 3 1/4 in long by 3/4 in wide with a wooden handle. Sharpened on one side only, this knife will tackle any size clam. Made in the U.S.A.

---

LGCLS

R. Murphy 3 3/4 in. Gulf Oyster Knife

---

R. Murphy 3 3/4 in. Gulf Oyster Knife is long enough to handle "baker" sized oysters and very strong. Difficult to show in a picture, but this knife is thick in the middle and tapers down to edges sharpened on both sides. Made in the USA.

---

GUOYSPHCG

R. Murphy Damariscotta 2 5/8 in. Oyster Knife

---

The R. Murphy Damariscotta 2 5/8 in. Oyster Knife is a variation of the WellFleet. The same Bubinga wood resin infused handle, brass riveted to a full tang stainless steel blade. The handle is a little sleeker design and the grip is more comfortable for small to medium hand sizes.

---

NEOYSD

R. Murphy New Haven Curved Tip Oyster Knife

---

R. Murphy New Haven 2 5/8 in. Oyster Knife has a commercial blade which is extra thick for durability. The tip is curved upward to catch the top shell of the oyster and leverage against the bottom for easy opening.

---

NHOYSPHCG

R. Murphy Small Blade Clam Knife

---

R. Murphy small clam knife features a Stainless Steel blade measuring 2-1/2 x 5/8 inches, sharpened on one side.

---

SMCLS

R. Murphy Wellfleet 2 5/8 in. Oyster Knife

---

The R. Murphy Wellfleet 2 5/8 in. Oyster Knife features a bubinga wood handle that is secured to a full tang stainless steel blade with brass rivets. The wood is vacuum infused with resin to create a tough, waterproof handle.

---

NEOYSW

Victorinox 4 in. Boston Oyster Knife

---

The Victorinox Boston is ideally suited to delicately shelled oysters from the Pacific Northwest. The thin long tip works well with the fluted shells and the long length makes it easy to slice the abductor muscle and free the oyster.

---

44696

Victorinox New Haven Style, curved tip Oyster Knife

---

This 2-3/4 inch blade is particularly useful for oysters where the top half (operculum) of the shell is smaller than the bottom. These can be difficult to pry at the hinge as you would other oysters. The curved tip allows you to catch the lip of the top shell and leverage against the bottom for easy, clean opening of the oyster.

---

44693

Victorinox 3 1/2 inch wide Clam Knife

---

Blue Handle helps to quickly distinguish the Clam Knife from the Oyster Knives. The wide blade works well on larger cherrystone clams.

---

286.9007.09

Victorinox 3 in. Boston Style Oyster Knife

---

The Victorinox 3 inch Boston knife is a good for multiple oyster types. The shorter blade adds strength and it is narrow enough to use on curly shells. If you want just one knife to use on anything from Olympias to Gulf oysters, this would be the choice.

---

44694

Victorinox 3.25 inch Narrow Clam Knife

---

The Victorinox narrow blade clam knife works for all clams but is particularly useful for opening smaller sizes. The blue handle enables you to quickly distinguish the clam knife from your oyster knives.

---

286.9006.08

Victorinox 4 in. Galveston Oyster Knife

---

The Victorinox Galveston Red Handles Oyster knife is a strong blade with a good grip. This knife is best suited for thick, smooth-shelled Atlantic and Gulf oysters.

---

44695

Victorinox Providence style 2.75 inch Oyster Knife

---

Providence Style oyster knives are short and strong with a nice pointed tip. Suitable for Northwest or Atlantic oysters.

---

44692

Yellow Shucker Paddy Universal 3 in. Oyster Knife

---

This knife tip slides nicely into any oyster, and the unique handle allows you to pop the shell with a flick of the wrist. I usually am unhappy with the appearance of an oyster due to the top cut. So, I remove the lower abductor and flip the oyster over for better presentation. Not necessary with this shucker. No more cut knuckles and really fast. I know it looks strange, but I promise that you are going to love this oyster shucker.

---

SK2013YL

Black Shucker Paddy Universal 3 in. Oyster Knife

---

This knife tip slides nicely into any oyster, and the unique handle allows you to pop the shell with a flick of the wrist. I usually am unhappy with the appearance of an oyster due to the top cut. So, I remove the lower abductor and flip the oyster over for better presentation. Not necessary with this shucker. No more cut knuckles and really fast. I know it looks strange, but I promise that you are going to love this oyster shucker.

---

SK2013BK