07920 $11.15In Stock
| Dexter EZ Edge Hand-Held Knife Sharpener
Dexter Hand-Held sharpener has tungsten-carbide blades set at the correct angle for sharpening Dexter and most German brand knives. This style sharpener is popular with chefs who are on travel to competition or simply prefer a hand-held solution over the use of sharpening stones. Very quick and simple to use, just 3 to 4 strokes will renew even a very dull edge.
07920
D9 0092 00 $82.50In Stock
| F Dick Rapid Steel Action Set
The Rapid Steel Action set is the best guided honing tool on the market. This device simplifies the honing process to remove burrs and realign knife edges, without requiring the technical knowledge that can make honing a burdensome process. This is designed to be used in lieu of a honing rod for regular edge maintenance.
To Use:
Hold the device with your less-dominant hand, by placing your thumb through support hole and tucking your fingers into the vertical rib along the back side of the unit.
Hold the knife with your dominant hand and guide the blade through the center slot of the device from handle to tip.
Repeat this action several times while applying light pressure.
D9 0092 00
D9 0082 00-05 $79.50In Stock
| F. Dick Master Steel HyperDrill Sharpener
The F. Dick Master Steel HyperDrill simplifies the honing process to remove burrs and realign knife edges, without requiring the technical knowledge that can make honing a burdensome process. This is designed to be used in lieu of a honing rod for regular edge maintenance.
To Use:
Hold the device with your less-dominant hand, by placing your thumb through support hole and tucking your fingers into the vertical rib along the back side of the unit.
Hold the knife with your dominant hand and guide the blade through the center slot of the device from handle to tip.
Repeat this action several times while applying light pressure. Made in Germany.
D9 0082 00-05
D9 0082 02 $18.50In Stock
| F. Dick Metal Holder for Master Hyper Drill
F. Dick Metal Plate attaches to table in order to hold Master Steel Hyper Drill in place (D9 0082 00). Made in Germany.
D9 0082 02
D9 0086 00 $149.50In Stock
| F. Dick Silver Steel Hyperdrill
Sharpening made easy with the Silver Steel Hyperdrill: Lean the knife blade slightly against one side of the slot while drawing the blade with light pressure through the rods. Repeat this action a few times and the result will be a razor sharp edge. Features: Features a safety handle for easy use. Fastening Eyes for easy fixing. Made entirely of stainless steel so no plastic fragments. No spring technology makes this more hygienic. 4 rods on this hyperdrill so twice the performcance. A great tool for Butchers. Made in Germany.
D9 0086 00
REP-3 $7.90In Stock
| Idahone 9 in. V-Type Replacement Rod- Coarse
Idahone 9 in. Coarse Cut Replacement Rod for the CS-24 or CS-4 V-Type Idahone Sharpening System.
Diameter is 5/16 inch
REP-3
REP-1 $7.90In Stock
| Idahone 9 in. V-Type Replacement Rod- Fine
Idahone 9 in. Fine Cut Replacement rod for the CS-4 or CS-24 V-Type Idahone Sharpening System.
Diameter is 5/16 inch
REP-1
CS-4 $46.95In Stock
| Idahone V-Type Ceramic Rod Knife Sharpener
This sharpener is one of Idahone's most popular products and is excellent for both novice and expert.
Includes spring loaded storage in the oak base and comes with two coarse and two fine grit sharpening rods which are 9" long and 5/16" in diameter. Grit ratings on the rods are approximately 1200-1500 for the fine and 100-200 for the coarse.
The sharpening angles are pre-fixed at 15 degrees for sharpening on the coarse rods and 22 degrees for finishing on the fine rods so anyone can achieve a perfectly sharpened knife with the CS-4.
CS-4
CS-24 $48.50In Stock
| Idahone V-Type Four Rod Sharpener with Guard
This Idahone sharpener is a very effective, cost efficient and easy way to sharpen any western style knife, including Japanese brands. It comes with coarse and fine rods and notches for either 15 or 22 degrees. (Asian knives use 15, Germans 22). Simply place the rods in the holder, hold the knife perpendicular to the table and run it from heel to tip along both sides of the knife.
CS-24
RSN-20-BK $19.95In Stock
| Kyocera Ceramic Hand Sharpener
This ceramic wheel draw sharpener is ideal for quick sharpening of double beveled steel knives.
It is not recommended for one sided knives, ceramic knives or serrated knives.
RSN-20-BK
SR-2 $14.95In Stock
| Mac Hand Held ''Roll Sharp''
The ceramic wheel sharpening system recommended by MAC.
The easiest, fastest and most fool-proof tool to sharpen your MAC Knives.
SR-2
SIGSA2102V $34.95In Stock
| Robert Welch Signature Hand Held Sharpener
Robert Welch Signature Hand Held Sharpener is a fast and easy way to maintain your Robert Welch knives. The wheel is made of advanced ceramic, set at the appropriate 15 degree angle for Robert Welch knives. This can also be used for Japanese knives, or any knife with a bevel set at a 15-16 degree angle.
By applying gentle pressure with 10-12 strokes of the length of blade through the guide, you will have an amazingly sharp knife that is ready for work.
Please note, this will not work for serrated knives.
SIGSA2102V
4.3323-X1 $14.50In Stock
| Victorinox Dual Knife Sharpener
This neat little sharpener is no larger than a pen (13.97cm in length). Don't let its size fool you as it offers versatility like no other. It features a ceramic honing rod for blades with a groove for sharpening fish hooks. There's also a "V" style fine ceramic draw sharpener on the opposite end. This tool is exteremely effective for use on pocket knives, or paring and utility blades.
Made in: Germany
4.3323-X1
7.8715 $28.55In Stock
| Victorinox Swiss Sharp Hand Held Sharpener
The Victorinox Swiss Sharp Hand Held Sharpener provides a razor-sharp edge quickly with extreme precision. Easy to use, the ergonomic handle fits the left or right hand comfortably and securely and also has a full length finger guard to protect fingers while sharpening.
7.8715
3059730101 $25.00In Stock
| Wusthof 2-Stage Knife Sharpener
Specifically designed for the angle set on Wusthof knives by their new Ptec method.
3059730101
32605-000 $89.99In Stock
| Zwilling V-Edge Knife Sharpener
Zwilling V-Edge Knife Sharpener is a unique new knife sharpener that has the ability to adjust to multiple angles. This set comes with two angle adapters (German and Japanese) and the options on sharpening rods are Fine, Medium and Course. For many this is a major upgrade for a portable draw sharpener, it is easier to use and adjust to proper angles, the stone rods are a much less aggressive material than being used in other draw sharpeners so this should improve the life of your knives. Made in Germany.
32605-000